UEWScholar Home
→
Theses
→
Masters
→
Faculty of Technical Education
→
Department of Mechnical Technology Education
→
Recent submissions

Department of Mechnical Technology Education: Recent submissions

Now showing items 21-40 of 68

The low enrolment of technical courses at the senior hightechnical schools in the upper west region a case study of Tumu Senior High Technical School

Yesse, I.I. (University of Education, Winneba., 2016-08)

It has become undeniable fact that most of the technical schools are virtually collapsing because people look down upon them. People have misconception that technical courses are for those with low academic performance, ...
Investigation into the effect of scrap metal usage on locally manufactured domestic machines in the Cape Coast metropolis

Adjabeng, E.S. (University of Education, Winneba., 2016-08)

The main objective of the study was to investigate into the effect of scrap metal usage on locally manufactured domestic machines in the Cape Coast Metropolis. This study adopted the case study strategy. Both qualitative ...
Impact of mechanical industries on the environment -a case study in Twifu Atti Morkwa municipality in the Central region of Ghana

Affadzie, J. (University of Education, Winneba., 2017-11)

The main purpose of the study was to investigate the impact of mechanical industries on the environment in Twifu Atti-Morkwa Municipality in the Central Region. This study employed case study research design. The researcher ...
Assessing the skills of roadside mechanics in diagnosing and fixing problems of vehicle systems and components in the Tamale metropolis

Ziblim, B. (University of Education, Winneba., 2016-07)

This dissertation assesses the skills of roadside mechanics in diagnosing and fixing problems of vehicle system and components in the Tamale Metropolis. In the study, the various vehicle repair and maintenance skills ...
An assessment of the perceived falling standards in practical skills of trainees a case study of mechanical engineering craft- practice in technical and vocational education in the Techiman municipality

Abdul-Razak, N. (University of Education, Winneba., 2016-10)

The study assessed the perceived falling standards in practical skills of trainees, using mechanical engineering craft practice in Technical and Vocational Education within Techiman Municipality as a case study. The ...
Utilisation of health and safety measures among students in mechanical workshops of technical schools- case study of Asuansi and Cape Coast Technical Institutes

Amponsa-Dadzie, K. (University of Education, Winneba, 2016)

The general objective of this study was to investigate the utilization of health and safety measures among students of Asuansi and Cape Coast Technical Institutes. This study employed descriptive method to gather the ...
Scrap metal management practices in the Kumasi Suame magazine industrial area of the Ashanti region of Ghana challenges and prospects

Forkor, P. N. (University of Education, Winneba, 2017)

This study was conducted in the Kumasi Metropolis to assess the scrap metal management practices in the Suame Magazine industrial area. Today with increasing public awareness and research into the many environmental ...
Assessing the impact of the amatrol training programme on teaching and learning of engineering in polytechnics in Ghana (a case study of takoradi polytechnic)

Alhassan, M.O (University of Education, Winneba, 2016-11)

The research looked at the impact of the AMATROL Training Programme on teaching and Learning of Engineering in Polytechnics in Ghana (with Takoradi Polytechnic as a case study) since its introduction from 2012. The ...
Proposed design of solar operated blender for use in upper east region of Ghana case study of Yorogo, Yipaala and Vea communities of Bolgatanga municipality

Apodi, J. (University of Education, Winneba, 2014)

This report outlines systematic design of a solar operated blender for use in three communities (Yorogo, Yipaala and Vea) in the Bolgatanga municipality of Ghana that has no electricity and presents the results of ...
Assessing the impact of bagre dam spillage in the pru east district of Brong Ahafo region

Manu, D.K (University of Education, Winneba, 2019-04)

According to the World Commission on Dams (WCD, 2000) the global debate about dams is overwhelmingly complex and at the same time fundamentally simple. It is complex because the issues on dams are not limited to, design, ...
Proposed design of solar operated blender for use in upper east region of Ghana case study of Yorogo, Yipaala and Vea communities of Bolgatanga municipality

Apodi., J (University of Education,Winneba, 2014)

This report outlines systematic design of a solar operated blender for use in three communities (Yorogo, Yipaala and Vea) in the Bolgatanga municipality of Ghana that has no electricity and presents the results of ...
Maintenance of modern electronic fuel injection vehicles a case study at Suame Magazine – Kumasi

Nifacan, M. D. (University of Education, Winneba, 2014)

Continuous innovations of new models of vehicles have resulted in diverse combinations of electro- mechanical components. These have resulted in continuous pressure on the maintenance industry in the country, to maintain ...
An investigation into the management of workshops in technical schools in the Western Region

Asemsro, W. F. (University of Education, Winneba, 2014)

This Dissertation focuses on assessing the facilities in Technical school workshops in the context of developing the country. A descriptive survey design was adopted. Three research questions were formulated to guide the ...
An investigation into the asset integrity management system of Ghana’s oil industry. At the Atuabo Gas Company in Ghana

Addo, E. K. (University of Education, Winneba, 2015)

The purpose of the study was to investigate into the asset integrity management system of Ghana’s oil industry. The study adopted descriptive research design for the study. Qualitative and quantitative research methods ...
An assessment of the capabilities of small-scale automotive workshops in Ho to service new vehicle models

Dei, M. C. J. (University of Education, Winneba, 2013)

The automobile industry is changing very fast with newer models being completely different from traditional vehicles. Thus skills acquired in repairing older vehicles might not be relevant for these newer models. This ...
An assessment of technologies used in the small-scale palm oil processing industry in the Tano North and South Districts of the Brong Ahafo Region of Ghana

Ampofo, A. (University of Education, Winneba, 2013)

This study assessed the technologies used in small scale palm oil processing industries in the Tano North and South Districts of the Brong Ahafo Region of Ghana. Questionnaire survey, focus group discussions and ...
A critical study of the challenges faced by small and medium enterprises’ master craftsmen in the welding and fabrication industry in the Wa municipality

Kulah, J. (University of Education, Winneba, 2016)

Small Scale Enterprises (SMEs) contribute a substantial part to the development of every country especially in the developing countries. In Ghana, they were established before the development or the coming out of large ...
Design of ultrasonic brake pad wear detection system for cars

Agbanyo, E. Y. (University of Education, Winneba, 2021)

Road accidents in Ghana are re-occurring phenomenon. According to the National Road Safety Authority, most accidents can be attributed to brake pad failure or worn-out brake pad. Vehicle safety can be sought through the ...
Design and analysis of a camshaft for multi – cylinder spark ignition engine using finite element method

Ziblim, B. (University of Education, Winneba, 2021)

Camshafts are widely used in regulating, opening and closing of valves (inlet and exhaust) in the internal combustion engines. Proper design of camshaft is required for perfect tuning between opening and closing of valves. ...
Modelling and simulation of a connecting rod of an internal combustion engine using finite element method

Nkrumah, J. K. (University of Education, Winneba, 2021)

The connecting rod is one of the most important moving components in an internal combustion engine. It is the link between the piston and the crankshaft. Its primary function is to transmit the push and pull from the piston ...

Recently added

Department of Mechnical Technology Education: Recent submissions

Search UEWScholar

Browse

All of UEWScholar

This Collection

My Account