UEWScholar Home
→
Theses
→
Masters
→
Faculty of Technical Education
→
Department of Mechnical Technology Education
→
Recent submissions

Department of Mechnical Technology Education: Recent submissions

Now showing items 41-60 of 68

Experimental evaluation of a poultry mixer machine

Huseini, J. (University of Education, Winneba, 2021)

The challenges facing the local poultry farmers in Ghana is alarming. Only a few have access to poultry feed mixer. However, the Government of the day has an interest in self-employment. A poultry feed mixer was designed, ...
Design and thermal analysis of aluminium alloy piston using finite element method

Offei, D.I. (University of Education Winneba, 2022)

Piston is one of the most important moving components in an internal combustion engine. Because of its proximity to the burning flames in the engine, its material must be able to withstand the high temperature in the ...
The Effect of tyre pressure on vehicle performance

Adaworamah, J. (University of Education Winneba, 2021)

In the world today, due to the high cost of running a vehicle, there had been many research to see ways of minimizing the cost of usage of vehicle. Some of these costs come from the tyre of the vehicle, amount of fuel ...
Stress and strain analysis of variant forces acting on animal drawn mouldboard plough using ansys

Azegurah, N.I (2021)

In the field of agriculture, an advanced application of technology has taken full force as large scale of farms are nowadays manned with tractors, cultivators, harvesters, and other farm equipment. However, due to the ...
The impact of small scale welding industries on rural development- prospects and challenges in

Issahaque, R. (University of Education, Winneba, 2017)

This study sought to investigate into the impact of small scale welding industries on rural development, the prospect and challenges in Wa West district of the Upper West region. The population of the study consisted of ...
The effect of cooling rate on the mechanical properties of carbon steel on welded joints

Awudi, G. P. (University of Education, Winneba, 2021)

AISI 1028 Low carbon steel is a type of steel that contains 0.05% to 0.25% of carbon, Its easiness to cut, form, weld and its excellent mechanical properties makes it very useful in numerous industrial activities. It is ...
Numerical analysis of crankshaft used on Tvs Deluxe Auto-Rickshaw(Pragya)

Assam, S.P. (2021)

This study was motivated by the need for numerical analysis of crankshaft used on TVS Deluxe Auto-Rickshaw (Pragya)to determine the structural deformation it goes through under load. A crankshaft can be called the heart ...
Comparative study of physical and mechanical properties of A36 mild steel welded joints using oxyacetylene and shielded metal arc welding processes

Kesse, F.A. (University of Education, Winneba, 2021)

One of the crucial industrial methods for joining metals has been welding, hence many techniques have been developed to get an efficient and cost-effective process for different kinds of materials. In this study, an ...
Experimental study on a redesign coil spring compressor for light commercial vehicles

Acheampong, I.K. (University of Education, Winneba, 2021)

This study examined various types of coil spring compressors in the automobile industries. A coil spring compressor for compressing a coil spring during the assembly of subassemblies of automotive suspension systems, ...
An assessment on the effect of welding and heat treatment on medium carbon steel

Zoyah, J. (University of Education, Winneba, 2021)

The main aim of this project is to investigate the hardness and impact properties of medium carbon steel treated at different heat treatment processes. Three types of heat treatment were performed including annealing, ...
The impact of in-efficient diagnosis of vehicles by mechanics on the environment

Imoro, I (University of Education,Winneba, 2013)

The aim of the study is to assess the general knowledge of Technicians and Mechanics in the Automobile repair sector in Diagnosing Electronics managed Vehicles in the Tamale Metropolis .The research questions were based ...
Prevention of accidents through effective and efficient maintenance and repair work in various garages in Accra

Salakpi, S.S (University of Education,Winneba, 2013)

The National Road Safety Commission (NRSC) announced that there were 2,330 road accidents bringing it to an average of accident per day across the country in2011. In 2012, by November ending 13,535 vehicles crashes ...
Observance of safety practices in mechanical departments in technical institutes in Ghana the Case of Cape Coast Technical Institute

Thompson, W.E (University of Education,Winneba, 2013)

This study was an assessment of how students observe safety and health practices in the Mechanical workshops of Cape Coast technical institute. Questionnaires comprising both open and closed ended items were employed ...
Investigating the performance of rural and urban petty traders in Afigya-Kwabre District

Agoe, S (University of Education,Winneba, 2013)

his research investigated the performance of rural and urban petty traders in Afigya Kwabre District. A total of two hundred (200) questionnaires were administered in the study area but one hundred and ninety-three (193) ...
An assessment of the maintenance culture of government vehicles in senior high schools in the Akim-Oda Municipal Assembly in the Eastern Region of Ghana

Dzineku, A.E (University of Education,Winneba, 2014)

The main aim of this study was to explore the challenges in maintaining Government Vehicles in Senior High Schools. Basically, the research examined the maintenance culture of Government Vehicles in Senior High Schools ...
An assessment of competencies of students performance in conventional lathe machining at the higher national diploma (HND) level a case study of Koforidua and Accra Polytechnics

Agutey-Mensah, T (University of Education,Winneba, 2013)

The rationale for this write up generally enlighten the students and especially the practical lecturers and instructors to have a broader perspective about ascertaining the competencies of students performance level ...
A comparative study into the qualities of both foreign (India) and locally manufactured corn mill plates by artisans at Suame – magazine in Kumasi

Yawuliga, K.C (University of Education,Winneba, 2013)

The aim of this research was to investigate into the qualities of both locally manufactured (from Suame Magazine in Kumasi) and foreign (India) corn mill grinding plates and to recommend if there are new technologies ...
A study into safety observance of apprentices in welding and fabrication under the informal sector at Kukurantumi in the new Juabeng Municipality

Tang, B (University of Education,Winneba, 2017)

This case study was conducted at Kukurantumi in the Eastern Region of Ghana. The population of the research involved the artisans (welders) comprising of workshop owner, master welder and the apprentices. In reference ...
Falling standards of technical and vocational education and training in Ghana_ a case study of mechanical engineering trainees in Anlo, Kpando and have technical and vocational institutes in the volta region

Otchi, C.M.K (Unversity Of Education,winneba, 2013)

Technical and Vocational Education and Training (TVET) has emerged as one of the most effective human resource development strategies that the nation needs to embrace in order to train and modernize her technical ...
Factors influencing low female students’ participation in science, technology and engineering courses in second cycle institutions in the Bawku municipality

Yeboah-Bentil, R.I (Unversity Of Education,winneba, 2017)

This study explored students’ perceptions of the factors influencing low female students’ participation in science, technology and engineering courses in second cycle schools in the Bawku Municipality. The study also ...

Recently added

Department of Mechnical Technology Education: Recent submissions

Search UEWScholar

Browse

All of UEWScholar

This Collection

My Account