UEWScholar Repository

Investigating strength and durability properties of Pozzomix-opc stabilised earth blocks

Show simple item record

dc.contributor.author Ateyire, M.
dc.date.accessioned 2024-07-09T12:58:49Z
dc.date.available 2024-07-09T12:58:49Z
dc.date.issued 2016
dc.identifier.uri http://41.74.91.244:8080/handle/123456789/3684
dc.description A Dissertation in the Department of CONSTRUCTION AND WOOD TECHNOLOGY EDUCATION, Faculty of TECHNICAL EDUCATION, submitted to the School of Graduate Studies, University of Education, Winneba in Partial fulfilment of the requirement for the award of Master of Philosophy (Construction) degree DECEMBER, 2016 en_US
dc.description.abstract This research investigates the effect of replacing earth with 5% (P5/0), 9% (P9/0) and 12% (P12/0) Pozzomix cement and 3% pozzomix + 2% OPC (P3/2), 6% pozzomix + 3% OPC (P6/3), 8% pozzomix + 4% OPC (P8/4) on the compressive strength, water absorption and abrasion resistance of earth blocks and to deduce the variable that contributes most to these parameters. The engineering characteristics of the soil from Bernatech campus, Navrongo carried out in accordance with BS1377:1990 reveals that soil fines and coarse fractions constitute about 46.8% and 53.2% therefore suitable for brick production. The total number of bricks selected for the tests were one hundred and forty five (145) and they were 230mm x110mm x 90mm in size. Also the strength and durability criteria of hand-made bricks were investigated after 28 days curing. Results indicate that all the specimens obtained recommended density values with the batch P3/2 recording the lowest (1764kg/m3) and P12/0 the highest (1997kg/m3) density. The analysis showed that pozzomix contributed the most (71%) to the density of earth bricks. Again all the stabilized earth bricks saw a steady increase in dry compressive strength of 2.06N/mm2, 2.28N/mm2, 2.41N/mm2, 2.47N/mm2, 3.15N/mm2 and 4.73N/mm2 for specimens P5/0, P9/0, P12/0, P3/2, P6/3 and P8/4 respectively. The control and the 5% Pozzomix specimens did not perform well in wet compressive strength. The entire specimens responded negatively to water intake with the specimens P8/4 recording an impressive 0.096g/cm2/min reduction. The abrasion test values were within acceptable range with batch P8/4 again resisting abrasion the most with a record of 11cm2/g. Generally the brick specimens saw an improvement when the percentages of the stabilizers increased. It is appropriate to conclude that the use of Pozzomix with OPC will improve significantly the strength and durability properties of compressed earth bricks. The use of Pozzomix cement alone should be used sparingly especially lower percentage and in poor soils en_US
dc.language.iso en en_US
dc.publisher University of Education, Winneba en_US
dc.subject strength en_US
dc.subject durability properties en_US
dc.subject Pozzomix-opc en_US
dc.subject earth blocks en_US
dc.title Investigating strength and durability properties of Pozzomix-opc stabilised earth blocks en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search UEWScholar


Browse

My Account