dc.contributor.author |
Kwansah, M.O.B. |
|
dc.date.accessioned |
2024-03-20T09:44:31Z |
|
dc.date.available |
2024-03-20T09:44:31Z |
|
dc.date.issued |
2015 |
|
dc.identifier.uri |
http://41.74.91.244:8080/handle/123456789/2544 |
|
dc.description |
A THESIS SUBMITTED TO THE UNIVERSITY OF EDUCATION, WINNEBA –
KUMASI, IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE
DEGREE OF MASTER OF TECHNOLOGY EDUCATION IN ELECTRICAL /
ELECTRONICS TECHNOLOGY
AUGUST, 2015 |
en_US |
dc.description.abstract |
Control of mosquitoes is something of utmost importance in the present day with rising number
of mosquito borne illnesses. The effect of mosquito bites cannot be overlooked considering how
many deaths it has caused over the years. Specialty products like mosquito repellent used to
combat mosquitoes are required but most of the repellants available use chemical means to repel
or kill the mosquitoes which in a long run also becomes detrimental to ourselves and the
environment. This project presents the design and testing of an electronic mosquito repellent.
The project aims at developing a device that is capable of emitting ultrasonic energy of varied
frequencies. These frequencies do affect the auditory senses of pests such as mosquitoes, rodents,
avian and nocturnal insects by making them uncomfortable in their abode. However, these
frequencies do not affect the hearing ability of humans. This electronic mosquito repellent is
based on the 555 timer IC. This is a simple and useful mosquito repellent. The mosquito
repellent circuit generates an ultrasonic sound with a high output frequency that spreads within a
wide radius. The circuit is quite simple and require few external components. The oscillation
frequency is given by the value of resistors and capacitors and can be modified by changing the
value of the capacitors or replacing the fixed resistors with a variable resistor (potentiometer).
The actual oscillation frequency of this electronic mosquito repellent is above 20 kHz so what is
needed is a good high frequency piezo speaker. The electronic mosquito repellent circuit can be
supplied from a 12 V DC power supply. The method is to generate a high ultrasonic sound
output capable of repelling mosquitoes within a wide range with minimum electronic
components. In order to achieve this, the 555 timer is connected. The 555 timer has the ability to
convert an analog signal input (voltage) to digital signal output (frequency). The result is that the
555 timer can produce or generate frequencies between 20 and 60kHz. This frequency can repel |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
University of Education, Winneba |
en_US |
dc.subject |
Mosquito repellent |
en_US |
dc.subject |
Multi-vibrator |
en_US |
dc.subject |
Design |
en_US |
dc.title |
Design and implementation of the electronic mosquito repellent circuit using 555 astable multi-vibrator circuit |
en_US |
dc.type |
Thesis |
en_US |