• The comparative instructional effectiveness of print-based and video-based instructional materials for teaching practical skills at a distance 

  Donkor, F (Published in International Review of Research in Open and Distance Learning, 2010)

  Print-based instructional materials have been more popular than any other medium for teaching practical skills during the delivery of technical and vocational education and training via distance learning. However, the ...
• Effects of log export ban policy and dynamics of global tropical wood markets on the growth of timber industry in Ghana 

  Amoah, M; Becker, G; Nutto, L (Published in Journal of Forest Economic, 2008)

  The effects of log export ban (LEB) policy and dynamics of global tropical timber markets on the growth of Ghanaian timber industry were studied. The purpose was to follow the trend in the growth of timber industry from ...
• Assessment of logging efficiency and development of allometric models for predicting stumpage volume of some commercial tree species in Ghana 

  Amoah, M; Becker, G (Published in International Forestry Review, 2009)

  The need to develop instruments to capture the realistic stumpage volume and infl uence loggers to improve on their logging effi ciency has been a topic of interest in recent times. This study assessed the logging effi ...
• Pedagogic foundation of art education in Ghana 

  Duku, F.K (Published in Arts and Design Studies, 2012)

  This paper is one of the discourses to holistically evaluate university art education curriculum in Ghana. The faculty of any course is responsible for setting the climate or tone for the dissemination of information. ...
• Physico-chemical characteristics and market potential of sawdust charcoal briquette 

  Mitchual, S.J; Akowuah, J.O; Kemausuor1, F (Published in International Journal of Energy and Environmental Engineering, 2012)

  In the absence of the widespread distribution of modern cooking fuels in developing countries, efforts are being made to utilise biomass residues which abound in most of these countries. This is intended to replace ...
• Optimisation techniques for minimising saw teeth deflection and lumber thickness variation 

  Okai R.; Mitchual S.J.; Frimpong-Mensah K. (2006)

  Lumber size control is an essential element in maximising yield and productivity because a small reduction in rough green target size could lead to substantial savings in wood fibre. One of the key components of rough green ...
• Application of a novel technique for band sawing using a tip-inserted saw regarding surface profiles 

  Okai R.; Tanaka C.; Ohtani T.; Iwasaki Y. (2005)

  One way of achieving a successful forest management leading to biodiversity conservation is to ensure that wood is processed in an efficient manner. The authors succeeded in developing a new technology for bandsawing using ...
• Influence of mechanical properties and mineral salts in wood species on tool wear of high-speed steels and stellite-tipped tools - Consideration of tool wear of the newly developed tip-inserted band saw 

  Okai R.; Tanaka C.; Iwasaki Y. (2006)

  This paper is the third in a series of work done on a novel technique for bandsawing, which uses a tip-inserted saw, and is gaining increasing popularity in Japan. It builds up on previous reports on the novel technique ...
• Analysis of sawn lumber production from logging residues of branchwood of Aningeria robusta and Terminalia ivorensis 

  Okai R.; Boateng O. (2007)

  One way of meeting the supply demands of the wood industry is through the reduction of waste in timber processing. It has been estimated in Ghana that for every tree felled, nearly 50% of the tree volume is left in the ...
• Studies on reproducibility and accurate measurement of moisture content of wood samples using an electric moisture meter 

  Okai R. (2007)

  Studies were conducted on reproducibility, and accurate measurement of moisture content of four wood samples using an electric moisture meter. Experimental results indicated that there was no clear relationship between ...
• Livelihoods of fringe communities and the impacts on the management of conservation area: The case of Kakum National Park in Ghana 

  Amoah M.; Wiafe E.D. (2012)

  In the developing countries most of the rural communities depend on forest resources for their livelihood. The establishment of protected areas and national parks however deprive them of having access to these resources. ...
• Numerical modeling of the spatial scheme of monolithic multi-storey building 

  Humphrey D. (2012)

  The use of monolithic construction in building high-rise residential buildings in most cities have gained wide spread acceptance by scholars and practitioners in the building construction industry. The complexity of ...
• Analyses of bending moment effect on the floors of modeled high rise buildings 

  Humphrey D. (2012)

  Computer modeling aims at transforming the design process of buildings worldwide from the use of 2D to 3D, 4D and 5D design and coordination technologies. To investigate realistic values of bending moment and normal forces, ...
• Briquettes from maize cobs and Ceiba pentandra at room temperature and low compacting pressure without a binder 

  Mitchual S.J.; Frimpong-Mensah K.; Darkwa N.A.; Akowuah J.O. (Springer Verlag, 2013)

  This paper reports the findings of densifying ground maize cobs and Ceiba pentandra sawdust at room temperature using low compacting pressure without a binder. The maize cobs were crushed using a hammer mill. Particle sizes ...
• Effect of species, particle size and compacting pressure on relaxed density and compressive strength of fuel briquettes 

  Mitchual S.J.; Frimpong-Mensah K.; Darkwa N.A. (Springer Verlag, 2013)

  Densification of biomass waste materials has provided a great boost to the utilization of wood and agricultural waste for domestic and industrial fuel. However, the processes involved in the production of this fuel make ...
• Assessment of the performance of local and foreign road construction firms in Ghana 

  Gyadu-Asiedu W.; Danso H.; Asubonteng J.A. (Chinese Research Institute of Construction Management, 2013)

  The apparent imperfect competition that exists between local and foreign construction firms, coupled with the perception that governments give most of the big projects to the foreign firms has brought about the need to ...
• Models for predicting the density and compressive strength of rubberized concrete pavement blocks 

  Ohemeng E.A.; Yalley P.P.-K. (2013)

  The influence of rubber content within the range of 0-60% as the replacement for sand volume and water cement (W/C) ratio of (0.20-0.35) on the density and compressive strength of concrete pavement blocks (CPBs) was ...
• Bending properties and joint efficiency of some tropical hardwoods finger-jointed in green and dry states 

  Amoah M.; Kwarteng F.O.; Dadzie P.K. (Springer India, 2014)

  This study investigated the bending properties and joint efficiencies of some tropical hardwoods finger jointed in green and dry states. Two groups of finger-jointed pieces were produced from mill off-cuts of four different ...
• Addressing illegal logging in Ghana: Do value, social identity, and corporate social responsibility theories matter? 

  Amoah M.; Boateng R.K. (Commonwealth Forestry Association, 2014)

  Even though several researchers have advanced reasons underlying the prevalence of illegal logging in the tropics, the use of socialization, social identity and corporate social responsibility theories to explain this ...
• Determinants of choice of cane furniture as household commodity among the elites 

  Wiafe E.D.; Amoah M.; Bih F. (CESER Publications, 2014)

  This study evaluated the choice of people with higher level of formal education on cane furniture in Southern Ghana to provide information that could guide decisions of manufacturers and marketers of furniture. Data were ...

View more